Process flow: Crack treatment → Paste glue injection base → Sealing seam → Mixing glue → Glue → Finished product protection → Remove the base and surface treatment
Plastic shrinkage cracks mostly appear on the surface of newly-casted structures and components exposed to the air, and have different lengths and are incoherent. The cracks are relatively similar to the dry mud surface. Mostly after the initial setting of the concrete (generally around 4h after pouring), it occurs when the outside temperature is high, the wind speed is large, and the climate is very dry.
The multifunctional spraying machine has the functions of fast speed, high efficiency and low labor intensity. So do you know the specific working speed of a multi-function, the sprayer can easily spray an area of 200 square meters per hour, its spray thickness is 2 cm, and the brushing spray can achieve 10,000 square meters, which is an extremely optimistic operating speed. . This changes the shortcomings of the low degree of adhesion between the mortar and the wall and the density of the mortar during the operation of the artificial powder wall and the previous powder wall machine.
Product characteristics of high-pressure injection pump
Polyurethane plugging agent can be used for window frames, inner and outer walls, reservoirs, harbor projects, roofs, site improvement, ring water stop, continuous walls, tunnels, box culverts, cracks, expansion joints, basements, hairline cracks, shield tunnels, etc