Industry News

Characteristics of injection pump

Pulsation-free conveying: uniform motion throughout the whole process, stable operation, no pulsation, wide range of operating speed: 10,000 times the wide operating speed range greatly increases the flexibility of users without cleaning: conveying fluids with different characteristics only needs to replace the syringe, accurate flow rate: high control accuracy , When ≥30% of full stroke, the control error ≤ ± 0.5%
1. There are more than 300 types of injection pumps
2. Injection pumps are divided into electric injection pumps and propulsive injection pumps
3. Electric injection pump is divided into single channel, double channel, program-controlled ten channels, which can be selected according to your requirements
4. A variety of syringes are optional, which can automatically identify the syringe
5. The flow rate can be set to a minimum of 0.001 microliters / hour, the flow rate is 0.001 microliters / hour, the accuracy is ± 0.5%, the repeatability is ± 0.2%, and the operating speed of the electric injection pump is 9.5 * 10mm / min
6. Programmable syringe pump can freely set the flow rate of 2 or 10 syringes, and can set different flow rates respectively
7. With voltage and current signal output, with RS232 interface, can be connected to printer and computer, can be connected to time controller
8. The injection pump can choose to run bidirectionally, which can not only inject liquid in one direction, but also recover the injection liquid to achieve the mixing effect
9. The pulse can be set to prevent too much impact on the feeding of small animals
10. Optional foot switch for easy operation
11. The propulsive injection pump can be set to the number of advances (from 1 to 19,000 advances), and can be selected to run in both directions. It can either inject liquid in one direction or recover the injection liquid to achieve mixing.
12. Up to 4 simultaneous pushers can be selected (the injection needles connected to the pusher have more than 200 specifications. The injection volume and distance of each syringe can be set freely. The minimum distribution volume is 0.0526 microliters per injection , The moving distance is 3.2 microns, the fastest speed can reach 700 push injections per second, with RS232 signal output, you can connect the foot switch and computer)

[email protected]