The working principle of KZ-2A electric spray gun

The working principle of KZ-2A electric spray gun is to use liquid or compressed air to release quickly as power.
There are two types of spray guns: normal pressure type and pressurized type. The spray gun also has a pressure spray gun, a Karel spray gun, and an automatic recovery spray gun.
The spray gun includes a gun body and a gun head, the gun body and the gun head are connected by a connecting mechanism; the gun head includes a nozzle with a number of metal round steel plug welded inside the nozzle; the connecting mechanism includes a flange and a chain pin, The nozzle is made into a flat shape; its replacement is more convenient, the cost is lower, and it can effectively prevent the gun tip from falling off and wearing.
Extended information:
Several issues that need to be paid attention to when spraying:
The distance between the nozzle outlet and the coated object is called the gun distance. The smaller the gun distance, the greater the spraying pressure, and the greater the impact of the air pressure on the product, the coating will appear uneven and cause the problem of over-spreading.
The larger the gun distance, the smaller the spraying pressure, and the paint is easy to lose, so that the part of the object to be painted is too small and the paint cannot reach the specified thickness. The spraying fan surface is perpendicular to the surface of the object to be coated. When manually operating the spray gun, the spray width should not be too large, otherwise the problem of average coating will occur. KZ-2A electric spray gun is your good choice.